squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏，挤坏; 发吧唧声; 发吱嘎声

过去分词：squished　过去式：squished　现在分词：squishing　第三人称单数：squishes　

BNC.48495 / COCA.19433

牛津词典

verb

• （被）压坏，挤坏
  if sth soft squishes or is squished , it is crushed out of shape when it is pressed
• 发吧唧声；发吱嘎声
  to make a soft wet sucking sound

英英释义

noun

• the noise of soft mud being walked on

verb

• put (a liquid) into a container or another place by means of a squirting action
• walk through mud or mire
  1. We had to splosh across the wet meadow
  Synonym:squelchsplashsploshsloshslop

双语例句

• The squish patterns in engine piston bowls with different geometry are visualized by the method of oil streak in a motored single cylinder test engine.
  本文在一个拖动的单缸实验机上，利用油点条痕法显示了活塞上燃烧室凹坑中挤流运动的流谱，研究了燃烧室形状和几何尺寸对挤流谱的影响。
• The air motion in UCS combustion system is much stronger than that in base combustion system and the strong reversed squish lasts longer in the former than in the latter because the former has a far larger squish area than the latter.
  伞帘喷雾燃烧系统的挤气面积远大于原机，因此前者的空气运动明显强于后者，较强逆挤流维持的时间长于后者。
• It shows that the squish flow velocity decreases and the reverse flow velocity increases as cylinder heat transfer and cylinder gas leakage increase.
  本文还导出了考虑散热和活塞环漏气影响的轴向挤流速度和逆喷速度的解析关系式，该式表明散热和活塞环漏气使轴向挤流速度减小，逆喷速度增加。
• Use the Gradient Tool ( G) to squish and reposition the gradients.
  应用渐变工具（G）调整渐变的形态和位置。
• Gas Skunk: This is not good. It's gonna fall and squish us.
  这不好。它就要倒下并压扁我们了。
• At the end of compression stroke, the turbulent kinetic energy of flow around the edge of cylinder is weak, while that of squish in the middle is relatively strong.
  压缩上止点附近气缸边缘的湍动能很弱，而气缸中部挤流区域的湍动能则相对很强。
• A complete electric resistance furnace with all-fibred, double top of furnace, high emissive coating, protective enhancement coating, directive emission-enhancement heating elements, automatic furnace door squish mechanism and movable shroud was obtained, and its structural characteristic and energy saving theory was discussed.
  介绍了采用全纤维、双炉台、高发射率涂料、保护增强涂料、定向增强辐射加热元件、自动炉门压紧机构、移动罩式等技术制造的节能电阻炉的结构特点和节能原理。
• The reflected spray distributes at squish zone and concave zone of combustion chamber, big swirl of spray is obtained and expand to more domains.
  反射后的油束分布在燃烧室的挤流区和凹坑区，形成大的油束涡流，并向较大范围扩展。
• Valves are clustered near the center of the bore to minimize combustion chamber volume and to provide ample squish area.
  阀门是聚集在附近的孔中心，以尽量减少燃烧室量，以及提供足够的果酱领域。
• The effect of swirl strength on particulate emission at medium speed operating condition was not significant because the squish and expansion swirl generated by piston movement could meet the needs of fuel combustion.
  中速工况气缸内形成的挤气涡流和膨胀涡流基本可以满足燃料燃烧的需求，涡流强度在一定范围内的变化对降低柴油机排气微粒贡献不大。